论文首页哲学论文经济论文法学论文教育论文文学论文历史论文理学论文工学论文医学论文管理论文艺术论文 |
全部作者: 李江昊 李振波 陈佳品 第1作者单位: 上海交通大学微纳科学技术研究院;燕山大学信息科学与工程学院 摘要: This paper presents the Kinematics and control of an omni-directional mobile microrobot for micro-assembly in a micro-factory. The millimeters size microrobot is approximately 9 mm in length, 9 mm in width and 6 mm in height. It has three normal wheels which are connected with each other through a set of micro gears. Through a kind of special steering structure, the microrobot wheels can steer together with the same steering angles. A micro gripper is mounted on the top of the microrobot chassis, and can be turned with the front wheel synchronously. Through analyzing the rank of the kinematic matrix, the mobility freedom and steering freedom are calculated to demonstrate the omni-directional characteristic of the microrobot. Further, the microrobot and the micro gripper kinematic models are derived. Using these models, simulations show the relation between the microrobot movement situation and the control input. The microrobot is guided by an external vision system and controlled by a circuit board connected to the microrobot by flexible ultraminiature wires. Experiment results demonstrate the movement flexibility of the microrobot and the validity of the whole control system. 关键词: Mobile microrobot, Omni-directional, Micro-factory, Micro-assembly (浏览全文) 发表日期: 2007年05月15日 同行评议:
(暂时没有)
综合评价: (暂时没有) 修改稿: